Cleaning the canopy fabric:
Stains can be removed by using either a soft brush and soap solution or a pressure washer (at max. 30° C, max. 30 bar and min. 30 cm standoff distance). Subsequently rinse well with sufficient water so that no soap residues remain in the material.
Warning
If the sunshade is not fully opened, it can get damaged by the wind! Always open the sunshade as far as the limit stop. If the sunshade is not fully anchored, it can cause serious or even fatal injury! If the M10 screws work loose, the wind can lift the sunshade and may cause serious or even fatal injury. Use only the original M10 screws supplied by us. Tighten them firmly and then secure them with the locknuts.
Materials
Fabric
Sattler® is woven from branded acrylic fiber, spun-dyed fabric (300 gr/m2). This fabric is weather-proof, high/low temperature and rot resistant. It offers effective protection against oil, grease, mildew and algae, industrial pollution, exhaust fumes and other negative environmental factors. This fabric is also an excellent choice for screen printing on as well. | Airtex® is 100% polyester (PES) one side acrylic-coated outdoor fabric (light weight at 200 gr/m2). Airtex offers excellent UV protection and is dirt and water resistant thanks to it’s Teflon® finish.
Frame
The frame is made of very high quality, alloy, extruded aluminum profiles. The frame is powder-coated surface, high impact and shock resistant.
-800x1000.jpg "FILIUS Rectangle Umbrella")
